SERIAL COMMUNICATION FOR PROTEUS

To do serial communication through putty or terminal software for proteus just follow the below steps.

1.

   Use COMPIM in devices->miscellaneous as DB9

In COMPIM  edit properties as follow

 Then use a software named as VPSE

http://www.eterlogic.com/Products.VSPE.html DOWNLOAD

Configure VPSE as follows

1.

Select device in toolbar. Select device type as connector. Then click next.

2.

Select the desired com port . Then tick emulate baud rate. Press finish.

3.

  Now press the play button. Thats all now you can do the serial communication using terminal or putty for proteus.

THANKS,