SERIAL COMMUNICATION FOR PROTEUS

To do serial communication through putty or terminal software for proteus just follow the below steps.

1.

   Use COMPIM in devices->miscellaneous as DB9

In COMPIM  edit properties as follow

 Then use a software named as VPSE

http://www.eterlogic.com/Products.VSPE.html DOWNLOAD

Configure VPSE as follows

1.

Select device in toolbar. Select device type as connector. Then click next.

2.

Select the desired com port . Then tick emulate baud rate. Press finish.

3.

  Now press the play button. Thats all now you can do the serial communication using terminal or putty for proteus.

THANKS,

PUTTY - faster serial communication software

http://www.putty.org/
.http://www.downloadputty.net/

Putty is a faster serial communication software . For configuration check the previous post

TERMINAL SOFTWARE FOR SERIAL COMMUNICATION

http://free-serial-port-terminal.software.informer.com/1.0/

Use terminal software for view serial communication between PC and micro controllers.
-> Select port for your serial cable
-> Set baud rate as 9600
-> Bit used is 8
-> Parity as none
-> Stop bit as 1
-> Handshaking as none

Plug your serial cable and play......................................